Using OHIPay

Correct the claim. Review it. Then send it.

The next step depends on whether the claim has reached MOH. Edit an unsent claim directly; use Fix & resubmit for an eligible rejection. Saving a correction, marking it ready and sending a batch are separate steps.

Choose the path from the claim's current stage

Open the claim and read its current stage, MOH reason and any payment details before changing anything. A local warning during preparation is different from a rejection reported by MOH. The claim's history is the starting point; do not create a second claim simply because the first has no payment yet.

Which correction path fits the claim?
Where the claim isWhat to do in OHIPayWhat happens next
Saved claimsOpen the claim number, edit the fields and select Save changes.It remains saved until you mark it ready to send.
Ready to sendOpen the unsent claim and save the correction.Editing returns it to Saved claims. Review it and submit it again when ready.
Sent to MOH; waiting for a resultCheck available MOH reports and review the claim's outcome.A sent claim cannot be edited in place. Do not create a duplicate merely because a response is still pending.
Rejected; eligible for correctionUse Fix & resubmit, then edit the replacement draft.The action prepares a linked correction; it does not immediately send it.
Paid, partially paid or a paid related claim existsRead the line-level outcome and the action OHIPay offers before proceeding.Paid services must not simply be sent again. Some cases require the Ministry inquiry process rather than a replacement claim.

References: OHIPay features and product workflow · Ontario: Claims submission

For an unsent claim, edit the existing record

  1. Open Saved claims or Ready to send and select the claim number.
  2. Review the patient, service date, service and diagnostic codes, facility and any referral or admission details relevant to the correction.
  3. Select Save changes. The edit screen saves the correction; it does not show the new-claim Submit claim action.
  4. If the claim was Ready to send, it returns to Saved claims. Complete the review-and-send steps below when you are ready to queue the corrected version.

References: OHIPay features and product workflow

For a rejection, open the linked replacement

If OHIPay reports that a related service has already been paid or that the claim cannot be safely resubmitted, investigate that message. Do not work around it by entering the same service as an unrelated new claim. For a partially paid claim, review the offered correction carefully: the workflow can prepare refused lines without rebilling the paid lines.

  1. Open Rejected claims and read the MOH rejection reason on the claim, including any service-line detail.
  2. If you need the latest available replies, select Check MOH for reports. Review any download failure before relying on an unchanged list.
  3. Use Fix & resubmit on the eligible rejected claim. OHIPay prepares a linked replacement draft and opens its editor. In the ordinary rejected-claim path, the original is marked voided in OHIPay's local history; this does not send a cancellation request to MOH.
  4. Correct the underlying issue and inspect the replacement's codes, quantities, dates and patient details. Select Save changes, then follow the Saved → Ready to send → Sent to MOH workflow.

References: OHIPay features and product workflow

For EH2, save the patient's card correction

The Ministry defines EH2 as Mismatched Version Code. Verify the patient, the submitted card details and the service-date context before deciding what to change. A newer card is not, by itself, proof of the version that applied to an earlier service.

In the replacement claim's editor, correct the health-card number or version code as appropriate. Check card validates the entered details and shows an advisory result. It does not save the card change and does not guarantee claim acceptance.

Select Save changes to persist the correction. OHIPay saves the patient's card before saving the claim; if the card cannot be saved, the claim save stops. The submitted claim uses the stored patient card, so changing only the claim's service codes will not correct an unchanged version code.

The saved card is part of the patient record and is used for this and future claims. When the issue concerns an older service date or conflicting card information, review that history before replacing the stored value.

References: OHIPay features and product workflow · Ministry of Health: Error Report Rejection Conditions

Review, mark ready, then let the nightly send take it

  1. Return to Saved claims after saving the correction. Select the corrected claim and choose Submit selected (n), then confirm Submit claims.
  2. The claim moves to Ready to send. This means it is queued in OHIPay; it is not yet proof that MOH has received it.
  3. Review the other claims in Ready to send. OHIPay sends the whole Ready-to-send pool together, not just the corrected claim you most recently opened.
  4. OHIPay sends Ready-to-send claims to MOH automatically every night, at the time the Ready to send page shows for your account. There is no manual send. The next day, confirm that the corrected claim moved to Sent to MOH; if it is still in Ready to send, review its displayed reason.
  5. Saved drafts are not picked up by the nightly send. Only claims in Ready to send go.

References: OHIPay features and product workflow

Follow the result without rebilling on assumption

After sending, Check MOH for reports retrieves and reconciles available replies. No new MOH reports waiting means there was no new report available to download; it does not mean the correction has been accepted or paid. Read any reported failure and retry or contact support if a report could not be retrieved.

Use the rejection details and remittance outcome to decide the next action. The Ministry distinguishes claims error reports from remittance advice. A successful upload is one stage of the process, not the final payment decision.

A paid claim needing an adjustment or an overpayment review is a different situation from an unpaid rejected claim. Ontario's claims-submission guidance describes eSubmit or a Remittance Advice Inquiry for corrections and overpayments. Use that process where appropriate instead of creating another bill for a service already paid. The linked general correction guide below explains the Ministry process in more detail.

References: OHIPay features and product workflow · Ontario: Claims submission

Illustrative workflow · fictional example

An EH2 correction from rejection to a new review

In this fictional example, a physician sees EH2 on a sent claim and confirms that the submitted version code was entered incorrectly for that service. They choose Fix & resubmit, correct the card details in the replacement editor, use Check card to review the response and select Save changes.

The replacement is now saved, not sent. The physician selects it in Saved claims, confirms Submit claims and reviews the full Ready-to-send pool, which OHIPay's nightly send takes to MOH. They then check the Ministry result. The example illustrates the actions; it does not predict whether any real claim will be payable.

Questions about this workflow

Does Fix & resubmit immediately send my claim?

No. For an eligible rejection, it prepares a linked replacement draft and opens the editor. Save the correction, review it in Saved claims and mark it ready to send. OHIPay's nightly send then takes it to MOH.

Why did an edited claim leave Ready to send?

Saving an edit to an unsent Ready-to-send claim returns it to Saved claims. Review it and use Submit selected (n), then Submit claims, to mark the corrected version ready again.

Does Check card save the corrected version code?

No. Check card shows a validation result. Use Save changes to persist the patient's card correction and the claim edit. A valid card response is advisory and does not guarantee that the claim will be paid.

Will the nightly send take only my corrected claim?

No. The nightly send takes every claim in Ready to send. Review the entire Ready-to-send pool before the send time shown on the page.

Can I use this workflow to rebill a paid service?

Do not simply rebill a paid service. OHIPay checks for paid related services and handles eligible partially paid corrections separately. Review the remittance and use the Ministry inquiry process when the issue concerns an adjustment, overpayment or correction to a paid claim.

References and scope

This guide describes OHIPay's product workflow as checked on November 2, 2026. Product references describe the software; Ministry references explain the applicable external process. A saved, imported or sent claim is not evidence of Ministry approval or payment.

  1. OHIPay features and product workflow

    Product reference. Labels, edit and correction actions, patient-card saving, report checks and automatic sending were checked against the current OHIPay implementation on November 2, 2026.

  2. Ministry of Health: Error Report Rejection Conditions

    December 2022 edition, page 4: EH2 is Mismatched Version Code. Official source checked October 12, 2026. This definition does not by itself establish which card version applied on a particular service date.

  3. Ontario: Claims submission

    Updated April 22, 2026; Process to submit claims, Reconciliation and payment, and Inquiries. Checked October 12, 2026. Distinguishes error reports from remittance advice and describes eSubmit/RAI inquiries for corrections and overpayments.

For a different screen or an unexpected result, contact OHIPay support with the screen name and the message shown. Do not send health-card numbers or patient records through a public contact form.

Help with your workflow

Make the next step clear.

If the claim's stage or correction message does not match the situation you expected, ask support to help you review the workflow before preparing another claim.

Explore OHIPay features · See current pricing